Fitting of Rear Anti-Roll Bar - March 2019

The 1993 chassis was originally designed to run with 6" wheels and as a result, the rear ARB was situated over the top of the diff. This causes issues when running with 8" rear wheels as the droplinks have to sit at an excessive angle. It was suggested to me to fit bushes into the lower chassis tubes, as on later models. Having sourced an 'under the diff' rear ARB, I decided it would be prudent to visit Arch Motors for them to drill the chassis, fit bushes and braze them in. This they kindly did for me one Saturday morning.

Chronology